Datasheet 搜索 > 电感 > Coilcraft（线艺） > XAL1010-102ME 数据手册 > XAL1010-102ME 其他数据使用手册 1/3 页
￥ 0
XAL1010-102ME 其他数据使用手册 - Coilcraft（线艺）
制造商:
Coilcraft（线艺）
分类:
电感
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
XAL1010-102ME数据手册
Page:
of 3 Go
若手册格式错乱，请下载阅览PDF原文件
HIGH TEMPERATURE
Shielded Power Inductors
–
XAL1010
Document 804-1
Document 804-1 Revised 11/15/11
Inductance
2
DCR (mOhms)
3
SRF typ
4
Isat
5
Irms (A)
6
Part number
1
±20% (µH) typ max (MHz) (A) 20°C rise 40°C rise
XAL1010-221ME_ 0.22 0.33 0.37 115 98.8 41.0 55.5
XAL1010-451ME_ 0.45 0.60 0.66 66 70.5 40.0 53.0
XAL1010-102ME_ 1.0 1.00 1.10 42 55.0 32.0 43.5
XAL1010-152ME_ 1.5 1.60 1.76 33 36.6 31.0 40.5
XAL1010-222ME_ 2.2 2.55 2.80 22 34.0 24.5 32.0
XAL1010-332ME_ 3.3 3.70 4.10 21 27.4 18.2 25.0
XAL1010-472ME_ 4.7 5.20 5.70 19 25.4 17.5 24.0
XAL1010-562ME_ 5.6 6.30 6.93 16 23.6 15.7 21.2
XAL1010-682ME_ 6.8 8.10 8.90 14 21.8 14.0 18.5
XAL1010-822ME_ 8.2 11.70 12.90 12 18.3 12.9 17.1
XAL1010-103ME_ 10 13.40 14.75 11 17.5 11.5 15.5
XAL1010-153ME_ 15 16.90 18.60 9 15.5 9.9 13.8
1. When ordering, please specify termination and packaging coded:
XAL1010-153MED
Termination: E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% (typ) from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Weight 5.7 – 6.3 g
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +165°C with derated current.
Storage temperature Component: –40°C to +130°C.
Tape & reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 300/13″ reel Plastic tape: 24 mm wide, 0.4 mm thick,
16 mm pocket spacing, 10.21 mm pocket depth
PCB washing Only pure water or alcohol recommended
• Highcurrent–upto98.8A
• VerylowDCR–0.33mOhms
• SoftsaturationmakesthemidealforVRM/VRDapplications.
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
