Datasheet 搜索 > DA转换器 > ADI（亚德诺） > AD5360BSTZ-REEL 数据手册 > AD5360BSTZ-REEL 数据手册 24/28 页
器件3D模型￥ 430.571
AD5360BSTZ-REEL 数据手册 - ADI（亚德诺）
制造商:
ADI（亚德诺）
分类:
DA转换器
封装:
LQFP-52
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
引脚图在P10Hot
典型应用电路图在P20
原理图在P1
封装尺寸在P27
型号编码规则在P27
焊接温度在P9
功能描述在P3P10P15
技术参数、封装参数在P1P4P5P9
应用领域在P1
电气规格在P12
导航目录
AD5360BSTZ-REEL数据手册
Page:
of 28 Go
若手册格式错乱，请下载阅览PDF原文件
AD5360/AD5361
Rev. A | Page 24 of 28
SPECIAL FUNCTION MODE
If the mode bits are 00, then the special function mode is
selected, as shown in Table 14. Bits I21 to I16 of the serial data
word select the special function, while the remaining bits are
data required for execution of the special function, for example
the channel address for data readback.
The codes for the special functions in Table 16 show the
addresses for data readback.
Table 14. Special Function Mode
I23 I22 I21 I20 I19 I18 I17 I16 I15 I14 I13 I12 I11 I10 I9 I8 I7 I6 I5 I4 I3 I2 I1 I0
0 0 S5 S4 S3 S2 S1 S0 F15 F14 F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 F0
Table 15. Special Function Codes
Special Function Code
Data (F15 to F0) Action S5 S4 S3 S2 S1 S0
0 0 0 0 0 0 0000 0000 0000 0000 NOP.
0 0 0 0 0 1 XXXX XXXX XXXX X [F2:F0] Write control register.
F4 = 1: temperature over 130°C.
F4 = 0: temperature under 130°C.
Read-only bit. This bit should be 0 when writing to the control register.
F3 = 1: PEC
error.
F3 = 0: No PEC
error. Reserved.
Read-only bit. This bit should be 0 when writing to the control register.
F2 = 1: select Register X1B for input.
F2 = 0: select Register X1A for input.
F1 = 1: enable temperature shutdown.
F1 = 0: disable temperature shutdown.
F0 = 1: soft power-down.
F0 = 0: soft power-up.
0 0 0 0 1 0 XX [F13:F0] Write data in F13 to F0 to OFS0 register.
0 0 0 0 1 1 XX [F13:F0] Write data in F13 to F0 to OFS1 register.
0 0 0 1 0 0 Reserved
0 0 0 1 0 1 See Table 16 Select register for readback.
0 0 0 1 1 0 XXXX XXXX [F7:F0]
Write data in F7 to F0 to A
/B Select Register 0.
0 0 0 1 1 1 XXXX XXXX [F7:F0]
Write data in F7 to F0 to A
/B Select Register 1.
0 0 1 0 0 0 Reserved
0 0 1 0 0 1 Reserved
0 0 1 0 1 0 Reserved
0 0 1 0 1 1 XXXX XXXX [F7:F0]
Block write A
/B select registers.
F7 to F0 = 0: write all 0s (all channels use X2A register).
F7 to F0 = 1: write all 1s (all channels use X2B register).
0 0 1 1 0 0 XXXX XXXX XX [F5:F0]
F5 = 1: monitor enable.
F5 = 0: monitor disable.
F4 = 1: monitor input pin selected by F0.
F4 = 0: monitor DAC channel selected by F3:F0
(0000 = DAC0; 1111 = DAC15).
F3 = not used if F4 = 1.
F2 = not used if F4 = 1.
F1 = not used.
F0 = 0: MON_IN0 selected for monitoring (if F4 and F5 = 1).
F0 = 1: MON_IN1 selected for monitoring (if F4 and F5 = 1).
0 0 1 1 0 1 XXXX XXXX XXXX XX [F1:F0] GPIO configure and write.
F1 = 1: GPIO is an output. Data to output is written to F0.
F1 = 0: GPIO is an input. Data can be read from F0 on readback.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
