Datasheet 搜索 > 陶瓷电容 > muRata（村田） > GCM155R71C104KA55D 数据手册 > GCM155R71C104KA55D 数据手册 62/73 页
器件3D模型￥ 0.007
GCM155R71C104KA55D 数据手册 - muRata（村田）
制造商:
muRata（村田）
分类:
陶瓷电容
封装:
0402
描述:
Murata GCM 汽车 0402 系列高介电、小尺寸的 Murata GCM 0402 系列陶瓷电容器具有高电容值。 单片式电容器提供 COG 温度系数，无极性，由于采用 Ni 屏障端接，可提供更高的焊接沥滤电阻。 GCM 单片式电容器是 Murata 汽车级电容器的一部分。 由于在高频率下具有低阻抗，这些陶瓷电容器提供极佳的脉冲响应性和降噪性能。### 陶瓷表面安装 0402### 0402 系列
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
典型应用电路图在P71
封装尺寸在P62
型号编码规则在P4
封装信息在P5P19P69
焊接温度在P57P66
技术参数、封装参数在P19P20P27P29P31P36P42P45P48
应用领域在P19P20P27P29P31P36P42P45P48
导航目录
GCM155R71C104KA55D数据手册
Page:
of 73 Go
若手册格式错乱，请下载阅览PDF原文件
!
Note
• Please read rating and
!
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
58
GCM Series GCD Series GCE Series GCG Series GCJ Series GC3 Series KCM Series KC3 Series !Caution
(2) Example of a Disk Separator
An outline of a disk separator is shown as follows.
As shown in the Principle of Operation, the top
blade and bottom blade are aligned with the
V-grooves on the printed circuit board to separate
the board.
In the following case, board deflection stress will
be applied and cause cracks in the capacitors.
(1) When the adjustment of the top and bottom
blades are misaligned, such as deviating in
the top-bottom, left-right or front-rear
directions
(2) The angle of the V groove is too low, depth of
the V groove is too shallow, or the V groove is
misaligned top-bottom
IF V groove is too deep, it is possible to brake
when you handle and carry it. Carefully design
depth of the V groove with consideration about
strength of material of the printed circuit board.
Continued from the preceding page.
V-groove
Printed Circuit Board
[Outline of Machine]
[Principle of Operation]
[Cross-section Diagram]
Top Blade
Top Blade
Bottom Blade
Bottom Blade
Top Blade
Bottom Blade
Top Blade
Bottom Blade
Top Blade
Bottom Blade
Top Blade
Printed Circuit Board
V-groove
Recommended
Not Recommended
Top-bottom Misalignment Left-right Misalignment Front-rear Misalignment
Continued on the following page.
(3) Example of Router Type Separator
The router type separator performs cutting by a
router rotating at a high speed. Since the board
does not bend in the cutting process, stress on
the board can be suppressed during board
separation.
When attaching or removing boards to/from the
router type separator, carefully handle the boards
to prevent bending.
[Outline Drawing]
Example of Recommended
V-groove Design
Not Recommended
Left-right Misalignment Low-Angle Depth too Shallow Depth too Deep
Router
!
Caution
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
