Datasheet 搜索 > 插件电阻 > TE Connectivity（泰科） > HBA100MFZRE 数据手册 > HBA100MFZRE 数据手册 1/2 页
￥ 2.834
HBA100MFZRE 数据手册 - TE Connectivity（泰科）
制造商:
TE Connectivity（泰科）
分类:
插件电阻
描述:
HB 系列高电压，金属陶瓷膜 高可靠性 低值下低噪声 阻燃环氧涂层 电阻容差 | ±1% ---|--- 温度系数 | ±100ppm/°C 工作温度 | 0 ° C → +125 ° C 绝缘电阻 | 500V 直流时 106MΩ ### 径向/表面安装
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
功能描述在P1
技术参数、封装参数在P1P2
应用领域在P1
导航目录
HBA100MFZRE数据手册
Page:
of 2 Go
若手册格式错乱，请下载阅览PDF原文件
Characteristics - Electrical
HBA HB1 HB3
Power Dissipation - Power @ 20°C (W): 0.8 2.0 4.0
@ 70°C: 0.4 1.0 2.0
Ohmic Value - Min (Ohms): 1K 10K 10K
Max: 120M 1G 1G
Resistance Tolerance (%) (Tighter By Request): 1%, 2%, 5% 1%, 2%, 5% 1%, 2%, 5%
Maximum Working Voltage - DC or ACrms (Volts): 1kV 7.5kV 15kV
Insulation Resistance - Epoxy Coated, @500V dc (Ohms): >10
6
MΩ >10
6
MΩ >10
6
MΩ
Load Stability - 1000hr’s @ 70°C (%): ±0.5% ±0.5% ±0.5%
Temp. Rapid Change - -55°C to 125°C for 5 cycles (ΔR): ±0.1% ±0.1% ±0.1%
Endurance - 1000 Hours @ 200°C (ΔR): <=2% <=2% <=2%
Resistance to Soldering Heat - 350°C for 3.5seconds (ΔR): 0.05% 0.05% 0.05%
Temperature Coefficient (ppm/°C): ±100ppm/°C ±100ppm/°C ±100ppm/°C
(±20ppm/°C available to special order)
Voltage Coefficient:
Negligible up to 100K Negligible up to 200K
Increasing to 0.02ppm/Volt at 800K
Increasing to
0.01ppm/Volt at 1M0
Increasing to 1.0ppm/Volt at 5M0
Increasing to
1.0ppm/Volt at 10M
Increasing to 2.0ppm/Volt at 50M
Increasing to
2.0ppm/Volt at 100M
Increasing to 8.0ppm/Volt at 1000M
Increasing to
8.0ppm/Volt at 1000M
Ambient Temperature Range (°C): -55 to 125 -55 to 125 -55 to 125
Long Term Damp Heat (%): 0.25% 0.25% 0.25%
(Steady state 56 Days 95% RH at 40°C)
Noise (Quantech) Dependent -20dB (0.1μ V/V) at lower values
on Resistor Type and Value: +10dB (3.3μ V/V) at higher values
Encapsulation: Epoxy coating (Optional)
Solvent Resistance: Print will withstand the action of all
commonly used industrial solvents.
Lead Material: Tinned copper wire
Lead Length: Minimum 20mm
Lead Diameter: Nominal 0.6 ± 0.05mm
High Value / High Voltage Resistors
Type HB Series
1773310 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
Key Features
I Up to 15kV Element
Voltage
•
Unique specification
for the most deman-
ding applications
I High Ratio of Size
to Power
•
The solution to your
PCB population
problems
I 1kW to 1GW
•
Coupled with 1%
tolerance gives
ultimate design
flexibility
I Established Product
with Proven Reliability
I Low Inductance
•
For the fastest
switching speeds
Applications
I High Voltage
I Voltage Divider
I Surge
I Filter
I Balancing
I Inrush Limiting
TE Connectivity (TE) is a leading supplier of standard and custom designed high
value/high voltage resistors for high voltage, industrial, control, medical and
general-purpose use. The HB is a tough epoxy coated high voltage resistor, with axial or
radial leads, values up to 1G Ohm and an operational voltage to 20kV as standard and
30kV to order. The resistors are made from quality materials for optimum reliability and
stability. TE can test resistors to conform to relevant international, MIL or customer
specifications. TE is happy to advise on the use of resistors for high frequency
applications and to supply information for high voltage use.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
