Datasheet 搜索 > 电池管理芯片 > Linear Technology（凌力尔特） > LTC4364IMS-1#PBF 数据手册 > LTC4364IMS-1#PBF 数据手册 8/24 页
器件3D模型￥ 38.837
LTC4364IMS-1#PBF 数据手册 - Linear Technology（凌力尔特）
制造商:
Linear Technology（凌力尔特）
分类:
电池管理芯片
封装:
MSOP-16
描述:
LINEAR TECHNOLOGY LTC4364IMS-1#PBF 芯片, 电涌消除器, 4/80V, 锁定式, 16MSOP
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
引脚图在P7P8Hot
典型应用电路图在P1P19P20P21P24
原理图在P9
封装尺寸在P21
焊盘布局在P22P23
型号编码规则在P3
标记信息在P3
封装信息在P3
技术参数、封装参数在P4
应用领域在P1P7P8P11P12P13P14P15P16P17P18P19
电气规格在P3P4P5P6P12
导航目录
LTC4364IMS-1#PBF数据手册
Page:
of 24 Go
若手册格式错乱，请下载阅览PDF原文件
LTC4364-1/LTC4364-2
8
436412f
PIN FUNCTIONS
TMR: Fault Timer Input. Connect a capacitor between this
pin and ground to set the times for fault warning, fault
turn-off, and cool down periods. Either voltage regulation
or current regulation starts pulling up the TMR pin. The
current charging up this pin during the fault conditions
increases with the voltage difference between V
CC
and OUT
pins (see Applications Information). When TMR reaches
1.25V, the F LT pin pulls low to indicate the detection of a
fault condition. If the condition persists, the pass device
controlled by HGATE turns off when TMR reaches the
threshold of 1.35V. As soon as the fault condition disap-
pears, a cool down interval commences while the TMR
pin cycles 32 times between 0.15V and 1.35V with 2μA
charge and discharge currents. When TMR crosses 0.15V
the 32nd time, the HGATE pin is allowed to pull high turn-
ing the pass device back on if the OV pin voltage is below
its threshold for the LTC4364-2 version. The HGATE pin
latches low after fault time-out for the LTC4364-1.
UV: Undervoltage Comparator Input. When the UV pin
falls below its 1.25V threshold, the HGATE pin is pulled
down with a 1mA current. When the UV pin rises above
1.25V plus the hysteresis, the HGATE pin is pulled up by
the internal charge pump. For LTC4364-1, after HGATE
is latched off, pulling the UV pin below 0.6V resets the
latch and allows HGATE to retry. If unused, connect to
the SHDN pin.
V
CC
: Positive Supply Voltage Input. The positive supply
input ranges from 4V to 80V for normal operation. It can
also be pulled below ground potential by up to 40V during
a reverse battery condition, without damaging the part.
Shutting down the LTC4364 by pulling the SHDN pin to
ground reduces the V
CC
current to 10μA.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
