Datasheet 搜索 > 光敏传感器 > TT Electronics/Optek Technology > OPB815L 数据手册 > OPB815L 数据手册 1/2 页
￥ 23.724
OPB815L 数据手册 - TT Electronics/Optek Technology
制造商:
TT Electronics/Optek Technology
分类:
光敏传感器
封装:
BAG
描述:
OPTEK TECHNOLOGY OPB815L 透射光中断, 光晶体管, 面板/机箱, 9.5 mm, 1.52 mm, 20 mA, 2 V
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
焊接温度在P2
功能描述在P1
技术参数、封装参数在P1
导航目录
OPB815L数据手册
Page:
of 2 Go
若手册格式错乱，请下载阅览PDF原文件
Technical Data Sheet
Multicore X39
September 2007
NO CLEAN CORED SOLDER WIRE FLUX
Properties of Multicore X39 solid flux for cored
solder wires:
x No clean
x Low residue
x Eliminates cost of cleaning
x Halide free
x Non-corrosive formulation
x Negligible residues
x Fast Soldering on copper and brass
PRODUCT RANGE
Multicore X39 cored wires are manufactured as
standard with a nominal flux content of 1%.
Multicore X39 cored wires are available in a variety of
alloys conforming to J-STD-006 and EN 29453 or
alloys conforming to similar national or international
standards. For details refer to document “Properties of
Alloys used in Cored Solder Wires ”. A wide range of
wire diameters is available.
TECHNICAL SPECIFICATIONS
A full description of test methods and detailed test
results are available on request.
Alloys: The alloys used for Multicore flux cored solder
wires conform to the purity requirements of the
common national and international standards. A wide
range of wire diameters is available manufactured to
close dimensional tolerances. For details refer to
document “Properties of Alloys used in Cored Solder
Wires ”.
Flux: Multicore X39 solid flux is based on modified
rosins and halide free carboxylic acid activators. In use
it has a mild rosin smell and leaves a small quantity of
clear residue. It may be classified as RO L0 according
to J-STD-004 (January 1995), LR3CN according to
IPC-SF-818 or DIN F-SW32 according to DIN 8511. It
meets the requirements of Bellcore TR-NWT-000078
issue 3 (December 1991).
FLUX PROPERTIES
TEST RESULT
Acid value 215mg KOH/g
Halide content Zero
Copper mirror Pass
Chromate paper Pass
Corrosion J-STD-004 Pass
Test IPC-SF-818 Pass (10 days)
BS 5625 Pass
DTD 599A Pass
DIN 8516 Pass
JIS-Z-3197 Pass
SPECIAL PROPERTIES
The uncleaned residues PASS SIR testing to the
Bellcore TR-NWT-000078 issue 3 (December 1991)
and IPC Class 1,2 and 3 protocols. They also pass the
electromigration test specified by Bellcore TR-NWT-
000078.
BELLCORE TR-NWT-000078 ISSUE 3
SIR TEST RESULTS ON UNCLEANED COMBS
Test conditions 35°C, 85% RH
Test time, h 24 96
Surface insulation
resistance, ohms 3.17 x 10
11
3.52 x 10
11
Passmark, ohms - 10
11
IPC-SF-818
SIR TEST RESULTS ON UNCLEANED COMBS
Test conditions 85°C, 85% RH
Test time, h 0 24 96 168
Surface insulation
resistance, ohms
1.63 x
10
12
1.68 x
10
9
3.37 x 10
9
3.43 x 10
9
Passmark, ohms - 10
8
10
8
10
8
BELLCORE TR-NWT-000078 ISSUE 3
ELECTROMIGRATION TEST RESULTS ON UNCLEANED COMBS
Test conditions 85°C, 85% RH
Test time, h 96 500
Bias, V (DC) No bias 10
Surface insulation
resistance, ohms
1.16 x 10
9
5.43 x 10
9
Unfluxed control, ohms 5.09 x 10
9
8.91 x 10
9
NOT FOR PRODUCT SPECIFICATIONS
THE TECHNICAL INFORMATION CONTAINED HEREIN IS INTENDED FOR REFERENCE ONLY. PLEASE CONTACT HENKEL
TECHNOLOGIES TECHNICAL SERVICE FOR ASSISTANCE AND RECOMMENDATIONS ON SPECIFICATIONS FOR THIS
PRODUCT.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
