Datasheet 搜索 > NXP（恩智浦） > P89LPC932A1FDH 数据手册 > P89LPC932A1FDH 数据手册 1/61 页
器件3D模型￥ 10.281
P89LPC932A1FDH 数据手册 - NXP（恩智浦）
制造商:
NXP（恩智浦）
封装:
TSSOP-28
描述:
NXP(恩智浦)/P89LPC932A1FDH 管装
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
导航目录
P89LPC932A1FDH数据手册
Page:
of 61 Go
若手册格式错乱，请下载阅览PDF原文件
1. General description
The P89LPC932A1 is a single-chip microcontroller, available in low cost packages, based
on a high performance processor architecture that executes instructions in two to four
clocks, six times the rate of standard 80C51 devices. Many system-level functions have
been incorporated into the P89LPC932A1 in order to reduce component count, board
space, and system cost.
2. Features
2.1 Principal features
n 8 kB byte-erasable Flash code memory organized into 1 kB sectors and 64-byte
pages. Single-byte erasing allows any byte(s) to be used as non-volatile data storage.
n 256-byte RAM data memory, 512-byte auxiliary on-chip RAM.
n 512-byte customer data EEPROM on chip allows serialization of devices, storage of
set-up parameters, etc.
n Two analog comparators with selectable inputs and reference source.
n Two 16-bit counter/timers (each may be configured to toggle a port output upon timer
overflow or to become a PWM output) and a 23-bit system timer that can also be used
as a Real-Time Clock (RTC).
n Enhanced UART with fractional baudrate generator, break detect, framing error
detection, and automatic address detection; 400 kHz byte-wide I
2
C communication
port and SPI communication port.
n Capture/Compare Unit (CCU) provides PWM, input capture, and output compare
functions.
n High-accuracy internal RC oscillator option allows operation without external oscillator
components.The RC oscillator option is selectable and fine tunable.
n 2.4 V to 3.6 V V
DD
operating range. I/O pins are 5 V tolerant (may be pulled up or
driven to 5.5 V).
n 28-pin TSSOP, PLCC, and HVQFN packages with 23 I/O pins minimum and up to 26
I/O pins while using on-chip oscillator and reset options.
2.2 Additional features
n A high performance 80C51 CPU provides instruction cycle times of 167 ns to 333 ns
for all instructions except multiply and divide when executing at 12 MHz. This is six
times the performance of the standard 80C51 running at the same clock frequency. A
lower clock frequency for the same performance results in power savings and reduced
EMI.
P89LPC932A1
8-bit microcontroller with accelerated two-clock 80C51 core
8 kB 3 V byte-erasable Flash with 512-byte data EEPROM
Rev. 01 — 20 July 2004 Product data
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
