Datasheet 搜索 > 接口芯片 > NXP（恩智浦） > PCA9518PW,118 数据手册 > PCA9518PW,118 数据手册 1/21 页
￥ 24.005
PCA9518PW,118 数据手册 - NXP（恩智浦）
制造商:
NXP（恩智浦）
分类:
接口芯片
封装:
SOT-360-1
描述:
专用接口, I2C, SMBus, I2C总线与SMBus系统应用, 3 V, 3.6 V, TSSOP, 20 引脚
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
导航目录
PCA9518PW,118数据手册
Page:
of 21 Go
若手册格式错乱，请下载阅览PDF原文件
1. General description
The PCA9518 is a BiCMOS integrated circuit intended for application in I
2
C-bus and
SMBus systems.
While retaining all the operating modes and features of the I
2
C-bus system, it permits
extension of the I
2
C-bus by buffering both the data (SDA) and the clock (SCL) lines, thus
enabling virtually an unlimited number of buses of 400 pF.
The I
2
C-bus capacitance limit of 400 pF restricts the number of devices and bus length.
Using the PCA9518 enables the system designer to divide the bus into an unlimited
number of segments off of a hub where any segment to segment transition sees only one
repeater delay and is multiple master capable on each segment.
Using multiple PCA9518 parts, any width hub (in multiples of five)
1
can be implemented
using the expansion pins.
The PCA9518 is a wider voltage range (2.3 V to 3.6 V) version of the PCA9518 and also
improves partial power-down performance, keeping I
2
C-bus I/O pins in high-impedance
state when V
DD
is below 2.0 V.
A PCA9518 cluster cannot be put in series with a PCA9515/16 or with another
PCA9518 cluster. Multiple PCA9518 devices can be grouped with other PCA9518
devices into any size cluster thanks to the EXPxxxn pins that allow the I
2
C-bus signals to
be sent/received from/to one PCA9518 to/from another PCA9518 within the cluster. Since
there is no direction pin, slightly different ‘legal’ low voltage levels are used to avoid
lock-up conditions between the input and the output of individual repeaters in the cluster.
A ‘regular LOW’ applied at the input of any of the PCA9518 devices will then be
propagated as a ‘buffered LOW’ with a slightly higher value to all enabled outputs in the
PCA9518 cluster. When this ‘buffered LOW’ is applied to a PCA9515 and PCA9516 or
separate PCA9518 cluster (not connected via the EXPxxxn pins) in series, the second
PCA9515 and PCA9516 or PCA9518 cluster will not recognize it as a ‘regular LOW’ and
will not propagate it as a ‘buffered LOW’ again. The PCA9510/9511/9513/9514 and
PCA9512 cannot be used in series with the PCA9515 and PCA9516 or PCA9518, but can
be used in series with themselves since they use shifting instead of static offsets to avoid
lock-up conditions.
PCA9518
Expandable 5-channel I
2
C-bus hub
Rev. 05 — 2 December 2008 Product data sheet
1. Only four ports per device are available if individual Enable is required.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
