Datasheet 搜索 > 音频放大器 > ST Microelectronics（意法半导体） > TDA7266P 数据手册 > TDA7266P 数据手册 5/12 页
￥ 2.942
TDA7266P 数据手册 - ST Microelectronics（意法半导体）
制造商:
ST Microelectronics（意法半导体）
分类:
音频放大器
封装:
PowerSSO-24
描述:
STMICROELECTRONICS TDA7266P 音频功率放大器, AB, 2通道, 6 W, 3.5V 至 12V, PowerSSO, 24 引脚
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
引脚图在P2Hot
封装尺寸在P10
技术参数、封装参数在P2P12
导航目录
TDA7266P数据手册
Page:
of 12 Go
若手册格式错乱，请下载阅览PDF原文件
5/12
TDA7266P
Figure 5. Microprocessor Driving Signals
3.1.2 B) Low Cost Application
In low cost applications where the
µ
P is not present, the suggested circuit is shown in fig.6.
The St-by and mute terminals are tied together and they are connected to the supply line via an external voltage
divider.
The device is switched-on/off from the supply line and the external capacitor C4 is intended to delay the St-by
and mute threshold exceeding, avoiding "Popping" problems.
So to avoid any popping or clicking sond, it is important to clock:
a Correct Sequence: At turn-ON, the Stand-by must be removed at first, then the Mute must be re-
leased after a delay of about 100-200ms. On the contrary at turn-OFF the Mute must be activated
as first and then the Stand-by.
With the values suggested in the Application circuit the right operation is guaranteed.
b Correct Threshold Voltages: In order to avoid that due to the spread in the internal thresholds (see
the above limits) a wrong external voltage causes uncertain commutations for the two functions we
suggest to use the following values:
Mute for Vcc>6.4V : VT = 2.3V
Mute for Vcc<6.4V : VT = Vcc/2 - 1
Stand-by : VT = 0.8V
+
V
S
(V)
V
IN
(mV)
V
ST-BY
pin 11
I
q
(mA)
ST-BY
MUTE
PLAY MUTE ST-BY
+7.5
1.8
0.8
V
MUTE
pin 10
4.1
2.3
OFF
OFF
D03AU1535
A
V
OUT
(V)
2.9
1.3
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
