Datasheet 搜索 > 接口芯片 > Microchip（微芯） > USB2517I-JZX 数据手册 > USB2517I-JZX 数据手册 26/76 页
器件3D模型￥ 15.668
USB2517I-JZX 数据手册 - Microchip（微芯）
制造商:
Microchip（微芯）
分类:
接口芯片
封装:
QFN-64
描述:
MICROCHIP USB2517I-JZX 接口, USB, USB集线控制器, USB 2.0, 3 V, 3.6 V, QFN, 64 引脚
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
引脚图在P12P22P23P24P25P26P27P32Hot
典型应用电路图在P2
原理图在P11
封装尺寸在P71
封装信息在P74
功能描述在P1P8P31
技术参数、封装参数在P68P69P74P75P76
应用领域在P1
电气规格在P62P63
型号编号列表在P7
导航目录
USB2517I-JZX数据手册
Page:
of 76 Go
若手册格式错乱，请下载阅览PDF原文件
USB 2.0 Hi-Speed Hub Controller
Datasheet
Revision 1.1 (04-26-10) 26 SMSC USB251x
DATASHEET
MISC
XTALIN ICLKx Crystal Input
24 MHz crystal
This pin connects to either one terminal of the crystal or to an external
24 MHz clock when a crystal is not used.
CLKIN External Clock Input
This pin connects to either one terminal of the crystal or to an external
24 MHz clock when a crystal is not used.
XTALOUT OCLKx Crystal Output
24 MHz crystal
This is the other terminal of the crystal, or a no connect pin, when an external
clock source is used to drive XTALIN/CLKIN.
SUSP_IND /
LOCAL_PWR /
NON_REM[0]
I/O Active/Suspend status LED
Suspend Indicator: Indicates USB state of the hub.
‘negated’ = Unconfigured, or configured and in USB Suspend
‘asserted’ = the hub is configured, and is active (i.e., not in suspend)
Local Power: Detects availability of local self-power source.
Low = Self/local power source is NOT available (i.e., the hub gets all power
from Upstream USB VBus).
High = Self/local power source is available.
NON_REM[0] Strap Option:
If this strap is enabled by package and configuration settings (see Table 8.1,
"Hub Configuration Options"), this pin will be sampled (in conjunction with
NON_REM[1]) at RESET_N negation to determine if ports [x:1] contain
permanently attached (non-removable) devices. Also, the active state of the
LED will be determined as follows:
NON_REM[1:0] = ‘00’, All ports are removable, and the LED is active high
NON_REM[1:0] = ‘01’, Port 1 is non-removable, and the LED is active low
NON_REM[1:0] = ‘10’, Ports 1 & 2 are non-removable, and the LED is active
high
NON_REM[1:0] = ‘11’, When available, ports 1, 2 & 3 are non-removable, and
the LED is active low
TEST IPD TEST pin
User must treat as a no connect pin or connect to ground. No trace or signal
should be routed or attached to this pin.
Table 5.2 USB251x Pin Descriptions (continued)
SYMBOL
BUFFER
TYPE DESCRIPTION
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
