Datasheet 搜索 > 电容式触摸传感器 > ATMEL（爱特美尔） > AT42QT2160-MMU 数据手册 > AT42QT2160-MMU 其他数据使用手册 4/49 页
器件3D模型￥ 15.122
AT42QT2160-MMU 其他数据使用手册 - ATMEL（爱特美尔）
制造商:
ATMEL（爱特美尔）
分类:
电容式触摸传感器
封装:
QFN-28
描述:
ATMEL AT42QT2160-MMU 电容式触摸传感器, I2C, 1.8 V, 5.5 V, QFN, 28 引脚, -40 °C
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
封装尺寸在P46
标记信息在P47
技术参数、封装参数在P17P43P44P47
应用领域在P1
导航目录
AT42QT2160-MMU数据手册
Page:
of 49 Go
若手册格式错乱，请下载阅览PDF原文件
4
9502A–AT42–07/08
AT42QT2160
Figure 3-1. Field Flow Between X and Y Elements
3.1 Keys and Slider
The QT2160 is capable of a maximum of 16 keys. These can be located anywhere within an
electrical grid of 8X and 2Y scan lines.
A lesser number of enabled keys will cause any unused acquisition burst timeslots to be pared
from the sampling sequence, to optimize acquire speed and lessen power consumption. Thus, if
only 8 keys are actually enabled, only 8 timeslots are used for scanning.
Additional processing can be done on the keys to form a slider. The slider will have to start at X0
and use only Y0. The slider can consist of a minimum of 2 keys and a maximum of 8 keys.
3.2 Enabling/Disabling Keys
Keys can be enabled by setting a nonzero burst length. A zero burst length disables the key.
4. Hardware and Functional
4.1 Matrix Scan Sequence
The circuit operates by scanning each key sequentially, key by key. Key scanning begins with
location X = 0, Y = 0 (key 0). X axis keys are known as rows while Y axis keys are referred to as
columns although this has no reflection on actual wiring. Keys are scanned sequentially by row,
for example the sequence X0Y0 X1Y0...X7Y0, X0Y1, X1Y1... etc. Keys are also numbered from
0...15. Key 0 is located at X0Y0. Table 4-1 shows the key numbering.
Table 4-1. Key Numbers
Each key is sampled in a burst of acquisition pulses whose length is determined by the Setups
parameter BL (Section 4.2 on page 5); this can be set on a per-key basis. A burst is completed
entirely before the next key is sampled; at the end of each burst the resulting signal is converted
to digital form and processed. The burst length directly impacts key gain; each key can have a
unique burst length in order to allow tailoring of key sensitivity on a key-by-key basis.
overlying panel
X
element
Y
element
X7 X6 X5 X4 X3 X2 X1 X0
Y0 76543210
Key numbers
Y1 15 14 13 12 11 10 9 8
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
