Datasheet 搜索 > TI（德州仪器） > LM2940CT-12.0 数据手册 > LM2940CT-12.0 产品手册 1/19 页
￥ 3.545
LM2940CT-12.0 产品手册 - TI（德州仪器）
制造商:
TI（德州仪器）
封装:
TO-220-3
描述:
LDO)/LM2940CT-12.0 管装
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
典型应用电路图在P1
原理图在P13
封装尺寸在P16P17P18
型号编码规则在P1P2
标记信息在P1
封装信息在P1
焊接温度在P4
功能描述在P1
技术参数、封装参数在P4P7P14
电气规格在P4P5P6P7P8P9P10P11P12
导航目录
LM2940CT-12.0数据手册
Page:
of 19 Go
若手册格式错乱，请下载阅览PDF原文件
LM2940/LM2940C
1A Low Dropout Regulator
General Description
The LM2940/LM2940C positive voltage regulator features
the ability to source 1A of output current with a dropout
voltage of typically 0.5V and a maximum of 1V over the
entire temperature range. Furthermore, a quiescent current
reduction circuit has been included which reduces the
ground current when the differential between the input volt-
age and the output voltage exceeds approximately 3V. The
quiescent current with 1A of output current and an input-
output differential of 5V is therefore only 30 mA. Higher
quiescent currents only exist when the regulator is in the
dropout mode (V
IN
−V
OUT
≤ 3V).
Designed also for vehicular applications, the LM2940/
LM2940C and all regulated circuitry are protected from re-
verse battery installations or 2-battery jumps. During line
transients, such as load dump when the input voltage can
momentarily exceed the specified maximum operating volt-
age, the regulator will automatically shut down to protect
both the internal circuits and the load. The LM2940/
LM2940C cannot be harmed by temporary mirror-image in-
sertion. Familiar regulator features such as short circuit and
thermal overload protection are also provided.
Features
n Dropout voltage typically 0.5V
@
I
O
=1A
n Output current in excess of 1A
n Output voltage trimmed before assembly
n Reverse battery protection
n Internal short circuit current limit
n Mirror image insertion protection
n P
+
Product Enhancement tested
Typical Application
00882203
*
Required if regulator is located far from power supply filter.
**
C
OUT
must be at least 22 µF to maintain stability. May be increased without bound to maintain regulation during transients. Locate as close as possible
to the regulator. This capacitor must be rated over the same operating temperature range as the regulator and the ESR is critical; see curve.
Ordering Information
Temperature
Range
Output Voltage
Package
5.0 8.0 9.0 10 12 15
0˚C ≤ T
J
≤ 125˚C LM2940CT-5.0 LM2940CT-9.0 LM2940CT-12 LM2940CT-15 TO-220
LM2940CS-5.0 LM2940CS-9.0 LM2940CS-12 LM2940CS-15 TO-263
−40˚C ≤ T
J
≤
125˚C
LM2940LD-5.0 LM2940LD-8.0 LM2940LD-9.0 LM2940LD-10 LM2940LD-12 LM2940LD-15 LLP 1k
Units
Tape and
Reel
LM2940LDX-5.0 LM2940LDX-8.0 LM2940LDX-9.0 LM2940LDX-10 LM2940LDX-12 LM2940LDX-15 LLP 4.5k
Units
Tape and
Reel
−40˚C ≤ T
J
≤
125˚C
LM2940T-5.0 LM2940T-8.0 LM2940T-9.0 LM2940T-10 LM2940T-12 TO-220
LM2940S-5.0 LM2940S-8.0 LM2940S-9.0 LM2940S-10 LM2940S-12 TO-263
−40˚C ≤ T
J
≤
85˚C
LM2940IMP-5.0 LM2940IMP-8.0 LM2940IMP-9.0 LM2940IMP-10 LM2940IMP-12 LM2940IMP-15 SOT-223
LM2940IMPX-5.0 LM2940IMPX-8.0 LM2940IMPX-9.0 LM2940IMPX-10 LM2940IMPX-12 LM2940IMPX-15 SOT-223
in Tape
and Reel
SOT-223
Package Marking
L53B L54B L0EB L55B L56B L70B
The physical size of the SOT-223 is too small to contain the full device part number. The package markings indicated are what will appear on the actual device.
January 2003
LM2940/LM2940C 1A Low Dropout Regulator
© 2003 National Semiconductor Corporation DS008822 www.national.com
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
