Web Analytics
Datasheet 搜索 > 音频放大器 > TI(德州仪器) > LMV1012UP-25 数据手册 > LMV1012UP-25 其他数据使用手册 1/15 页
LMV1012UP-25
0
LMV1012UP-25数据手册
Page:
of 15 Go
若手册格式错乱,请下载阅览PDF原文件
LMV1012 Analog Series:
Pre-Amplified IC’s for High Gain 2-Wire Microphones
General Description
The LMV1012 is an audio amplifier series for small form
factor electret microphones. This 2-wire portfolio is designed
to replace the JFET amplifier currently being used. The
LMV1012 series is ideally suited for applications requiring
high signal integrity in the presence of ambient or RF noise,
such as in cellular communications. The LMV1012 audio
amplifiers are guaranteed to operate over a 2.2V to 5.0V
supply voltage range with fixed gains of 7.8 dB, 15.6 dB,
20.9 dB, and 23.8 dB. The devices offer excellent THD, gain
accuracy and temperature stability as compared to a JFET
microphone.
The LMV1012 series enables a two-pin electret microphone
solution, which provides direct pin-to-pin compatibility with
the existing JFET market.
The devices are offered in extremely thin space saving
4-bump micro SMD packages. The LMV1012XP is designed
for 1.0 mm canisters and thicker ECM canisters. These
extremely miniature packages are designed for electret con-
denser microphones (ECM) form factor.
Features
(Typical LMV1012-15, 2.2V supply, R
L
= 2.2 k, C = 2.2 µF,
V
IN
=18mV
PP
, unless otherwise specified)
n Supply voltage 2V - 5V
n Supply current
<
180 µA
n Signal to noise ratio (A-weighted) 60 dB
n Output voltage noise (A-weighted) −89 dBV
n Total harmonic distortion 0.09%
n Voltage gain
LMV1012-07 7.8 dB
LMV1012-15 15.6 dB
LMV1012-20 20.9 dB
LMV1012-25 23.8 dB
n Temperature range −40˚C to 85˚C
n Offered in 4-bump micro SMD packages
Applications
n Cellular phones
n Headsets
n Mobile communications
n Automotive accessories
n PDAs
n Accessory microphone products
Schematic Diagram
20058701
Built-In Gain Electret Microphone
20058702
October 2005
LMV1012 Analog Series Pre-Amplified IC’s for High Gain 2-Wire Microphones
© 2005 National Semiconductor Corporation DS200587 www.national.com

LMV1012UP-25 数据手册

TI(德州仪器)
15 页 / 0.85 MByte

LMV1012 数据手册

TI(德州仪器)
用于高增益麦克风的模拟前置放大器 IC
TI(德州仪器)
TEXAS INSTRUMENTS  LMV1012UP-20/NOPB  音频功率放大器, 1通道, 2V 至 5V, BGA, 4 引脚
TI(德州仪器)
用于高增益麦克风的模拟前置放大器 IC 4-DSBGA
TI(德州仪器)
TEXAS INSTRUMENTS  LMV1012UP-25/NOPB  音频功率放大器, 1通道, 2V 至 5V, BGA, 4 引脚
TI(德州仪器)
LMV1012UP-07/NOPB 编带
TI(德州仪器)
用于高增益麦克风的模拟前置放大器 IC 4-DSBGA
TI(德州仪器)
用于高增益麦克风的模拟前置放大器 IC 4-DSBGA -40 to 85
TI(德州仪器)
用于高增益麦克风的模拟前置放大器 IC 4-DSBGA -40 to 85
TI(德州仪器)
National Semiconductor(美国国家半导体)
LMV1012TPX-25 4-DSBGA/4-UFBGA/TPA04GKA marking/标记 O
器件 Datasheet 文档搜索
器件加载中...
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件