Datasheet 搜索 > 微控制器 > NXP（恩智浦） > MC9RS08KA8CPG 数据手册 > MC9RS08KA8CPG 其他数据使用手册 1/42 页
器件3D模型￥ 15.071
MC9RS08KA8CPG 其他数据使用手册 - NXP（恩智浦）
制造商:
NXP（恩智浦）
分类:
微控制器
封装:
DIP-16
描述:
8位微控制器 -MCU 9RS08KA8 16PDIP
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
引脚图在P3P4Hot
原理图在P3
型号编码规则在P26
功能描述在P1P8
技术参数、封装参数在P1P6P18P20P21P23
电气规格在P5P6P7P8P9P10P11P12P13P14P15P16
导航目录
MC9RS08KA8CPG数据手册
Page:
of 42 Go
若手册格式错乱，请下载阅览PDF原文件
Freescale Semiconductor
Data Sheet: Technical Data
Document Number: MC9RS08KA8
Rev. 4, 6/2009
© Freescale Semiconductor, Inc., 2008-2009. All rights reserved.
This document contains information on a product under development. Freescale reserves the
right to change or discontinue this product without notice.
MC9RS08KA8
Features:
• 8-Bit RS08 Central Processor Unit (CPU)
– Up to 20 MHz CPU at 1.8 V to 5.5 V across temperature
range of –40°C to 85°C
– Subset of HC08 instruction set with added BGND
instruction
•On-Chip Memory
– 8 KB flash read/program/erase over full operating
voltage and temperature; KA4 has 4 KB flash
– 254 byte random-access memory (RAM); KA4 has 126
byte RAM
– Security circuitry to prevent unauthorized access to
RAM and flash contents
• Power-Saving Modes
– Wait and stop
– Wakeup from power-saving modes using real-time
interrupt (RTI), KBI, or ACMP
• Clock Source Options
– Oscillator (XOSC) — Loop-Control Pierce oscillator;
crystal or ceramic resonator range of 31.25 kHz to
39.0625 kHz or 1 MHz to 5 MHz
– Internal Clock Source (ICS) — Internal clock source
module containing a frequency-locked-loop (FLL)
controlled by internal or external reference; precision
trimming of internal reference allows 0.2% resolution
and 2% deviation over temperature and voltage;
supports bus frequencies up to 10 MHz
• System Protection
– Watchdog computer operating properly (COP) reset
with option to run from dedicated 1 kHz internal clock
source or bus clock
– Low-Voltage detection with reset or interrupt
– Illegal opcode detection with reset
– Illegal address detection with reset
– Flash block protection
• Development Support
– Single-Wire background debug interface
– Breakpoint capability to allow single breakpoint setting
during in-circuit debugging
• Peripherals
– ADC — 12-channel, 10-bit resolution; 2.5 μs
conversion time; automatic compare function; operation
in stop; fully functional from 2.7 V to 5.5 V (8-channels
available on 16-pin package)
– TPM — One 2-channel; selectable input capture, output
compare, or buffered edge- or center-aligned PWM on
each channel
– IIC — Inter-Integrated circuit bus module capable of
operation up to 100 kbps with maximum bus loading;
capable of higher baudrates with reduced loading
– MTIM1 and MTIM2 — Two 8-bit modulo timers
– KBI — Keyboard interrupts with rising or falling edge
detect; eight KBI ports in 16-pin and 20-pin packages
– ACMP — Analog comparator: full rail-to-rail supply
operation; option to compare to fixed internal bandgap
reference voltage; can operate in stop mode
• Input/Output
– 14/18 GPIOs including one output only pin and one
input only pin
– Hysteresis and configurable pullup device on all input
pins; configurable slew rate and drive strength on all
output pins
• Package Options
– 16-pin SOIC, PDIP or TSSOP
– 20-pin SOIC or PDIP
MC9RS08KA8 Series
Covers: MC9RS08KA8
MC9RS08KA4
TBD
20-Pin W-SOIC
Case 751D
16-Pin W-SOIC
Case 751G
20-Pin PDIP
Case 738C
16-Pin PDIP
Case 648
TBD
TBD
TBD
16-Pin TSSOP
Case 948F
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
