Datasheet 搜索 > 板对板连接器 > Samtec（申泰电子） > TSM-118-01-L-SV 数据手册 > TSM-118-01-L-SV 产品设计图 1/2 页
￥ 21.487
TSM-118-01-L-SV 产品设计图 - Samtec（申泰电子）
制造商:
Samtec（申泰电子）
分类:
板对板连接器
描述:
SMT 2.54mm Square Post Header Terminal Strip - TSM SeriesTSM series SMT board-to-board square post header terminal strips with a 2.54mm pitch, a black liquid crystal polymer insulator and phosphor bronze terminals with 0.25μm gold on post and matte tin on tail. These TSM series surface mount PCB board to board square post header terminal strips are available in a variety of configurations including single and double row, straight and right angle body orientation and an option of post lengths. The operating temperature range for these TSM series PCB SMT header terminals is -55 to 125°C. TSM PCB SMT headers with part number TSM-xxx-xx-x-SH are single row with horizontal pins. TSM PCB SMT headers with part number TSM-xxx-xx-x-SV are single row with vertical pins. TSM PCB SMT headers with part number TSM-xxx-xx-x-DH are double row with horizontal pins. TSM PCB SMT headers with part number TSM-xxx-xx-x-DV are double row with vertical pins. TSM PCB SMT headers with part number TSM-xxx-01-x-xx have a 5.84mm post height. TSM PCB SMT headers with part number TSM-xxx-02-x-xx have a 8.13mm post height.### 注TSW series PCB through hole board-to-board square post header terminals with a 5.84mm post height mate with the following: BCS standard box sockets - see stock number 766-6499 typically SSW socket strips - see stock number 765-5593 typically SSM surface mount socket strips - see stock number 765-5357 typically Post header terminals with an 8.13mm post height mate with the following: SSM surface mount socket strips (part numbers SSM-xxx-x-DH only) stock number 765-5357 typically.### 2.54 mm 板对板和线对板 - Samtec展开
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
封装信息在P2
导航目录
TSM-118-01-L-SV数据手册
Page:
of 2 Go
若手册格式错乱，请下载阅览PDF原文件
DO NOT
SCALE FROM
THIS PRINT
TSM-1XX-XX-XXX-SV-XX-XXX-XX
No OF POSITIONS
-02 THRU -50
ROW SPECIFICATION
-SV: SINGLE VERTICAL (USE TSM-XX-SV-XX)
LEAD STYLE
SEE TABLE 1
PLATING SPECIFICATION
-T: MATT TIN CONTACT AND TAIL
-S: SELECTIVE, 30 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-G: GOLD, 10 Au / 50 Ni MIN ON CONTACT,
3 Au / 50 Ni MIN ON TAIL
-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON
CONTACT, MATTE TIN ON TAIL
-F: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-H: HEAVY GOLD, 30 Au / 50 Ni MIN ON
CONTACT, 3 Au / 50 Ni MIN ON TAIL
-TL: TIN / LEAD (90/10+/-5%) CONTACT AND TAIL
[LEAD STYLE -01 & -02 ONLY]
-STL: SELECTIVE, 30 Au / 50 Ni MIN ON
CONTACT, TIN/LEAD (90/10+/-5%) TAIL
[LEAD STYLE -01 & -02 ONLY]
-TM: MATTE TIN CONTACT AND TAIL
-SM: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
-LM: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
-FM: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
-SS: STRIPE SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL (SEE NOTE 9)
OPTION #3
-P: PICK & PLACE PAD (SEE FIG. 3)
[USE PPP-07](4 POS MINIMUM
OR -02 & -03 POS WITH -TR)
(SEE NOTE 7)
-TR: TAPE & REEL (SEE NOTE 7)
(-02 THRU -22 POS)
OPTION #1
-LC: LOCKING CLIP (SEE FIG. 1)(SEE NOTE 8)
[USE LC-08-TM-02](-02 THRU -36 POS: 2 PER STRIP,
-02 POS: 1 PER STRIP)
-A: ALIGNMENT PIN (SEE FIG. 2)
POLARIZED POSITION: SPECIFY PIN OMITTED
OPTION #2
(No OF POS x .100[2.54])
.100
REF
2.54
(TYP)
5
MAX SWAY
(No OF POS -1) x .100[2.54]
.000[.00]
.015[.13]
01
02
C
TSM-XX-SV
.025
SQ REF
0.64
(TYP)
"B"
.008[.20]
(SEE TABLE 1
& NOTE 5)
.100
REF
2.54
.010
REF
0.25
.099 2.51
(No OF POS -2) x .100[2.54]
"F"
(CONTACT AREA)
2
MAX SWAY
(EITHER DIRECTION)
2
MAX SWAY
(EITHER DIRECTION)
LC-08-TM-02
C
T-1S6-XX-X-2
C
90°
-
0°
+
5°
(TYP)
.050
±.010
1.27
±0.25
(TYP)
"D" MAX
.056
REF
1.42
(TYP)
2
MAX TOE
C
C
C
.006
& NOTE 5)
"B"
(SEE TABLE 1
"E" REF
IN-PROCESS
.000[.00]
.005[.13]
"E" REF
"B"
(SEE TABLE 1
& NOTE 5)
IN-PROCESS
+.002[.05]
-.000[.00]
C
FIG 1
TSM-112-02-XXX-SV-LC SHOWN
-A OPTION ONLY
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
SINGLE ROW .100 SMT ASSEMBLY
BY:
TSM-1XX-XX-XXX-SV-XX-XXX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
8/21/2002
2
1
SHEET SCALE: 2.5:1
INSULATOR:
LCP, UL 94 VO
COLOR: BLACK
TERMINAL: PHOS BRONZE
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-SV-XX-XXX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. COPLANARITY TO BE WITHIN .006[.15].
3. BURR ALLOWANCE: .0015[.038] MAX.
4. MAXIMUM CUT FLASH: .015[.38] MAXIMUM ON TOP & SIDES OF BODY
AND .030[.76] MAXIMUM ON SURFACE MOUNT SIDE OF BODY.
5. POST HEIGHT VARIATION BETWEEN ANY TWO PINS: .005[.13] MAXIMUM.
6. MAXIMUM ALLOWABLE BOW: .002[.05] INCH/INCH AFTER ASSEMBLY.
7. LEADS MAY NOT BE VISIBLE FOR CUSTOMER VISUAL INSPECTION WITH -P
OPTION ON SMALLER POSITIONS PARTS.
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.
9. -01 LEAD STYLE ONLY, MATES WITH SSW, SSQ, BCS, SSM, ESW, ESQ.
10. MINIMUM PUSHOUT FORCE: 2LB. [8.90 N]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION BQ
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
