Datasheet 搜索 > 开发套件与开发板 > ADI（亚德诺） > AD-FMCOMMS3-EBZ 数据手册 > AD-FMCOMMS3-EBZ 产品设计参考手册 6/128 页
￥ 0.094
AD-FMCOMMS3-EBZ 产品设计参考手册 - ADI（亚德诺）
制造商:
ADI（亚德诺）
分类:
开发套件与开发板
封装:
-
描述:
ANALOG DEVICES AD-FMCOMMS3-EBZ 评估板, AD9361 射频 AGILE 收发器
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
原理图在P17P20P56
应用领域在P14
导航目录
AD-FMCOMMS3-EBZ数据手册
Page:
of 128 Go
若手册格式错乱，请下载阅览PDF原文件
UG-570 AD9361 Reference Manual
| Page 6 of 128
INITIALIZATION AND CALIBRATION
OVERVIEW
The AD9361 powers up into a sleep state for minimal power consumption. Before the AD9361 is operational, its clocks must be
enabled and initial calibrations completed. The purpose of this section is to describe in detail the operation of the different initialization
calibrations.
Table 1 lists the initialization calibrations documented in this section.
Table 1. Initialization Calibrations Detailed in this Section
Calibration Run Frequency Calibration Done Bit
BBPLL VCO calibration Once; any time BBPLL frequency changes 0x5E[7], 1 when locked
RF synthesizer charge pump
calibration
Once Rx: 0x244[7], 1 when done
Tx: 0x284[7], 1 when done
RF synthesizer VCO calibration
Occurs automatically when integer frequency word written. In TDD, occurs when TXNRX
changes logic level.
Rx: 0x247[1], 1 when locked
Tx: 0x287[1], 1 when locked
Baseband Rx analog filter tune
Once; update when BW changes
0x016[7], self clears when
done
Baseband Tx analog filter tune Once; update when BW changes
0x016[6], self clears when
done
Baseband Tx secondary filter tune Once; manual equations, update when BW changes
Rx TIA calibration Once; manual equations, update when BW changes
Rx ADC setup Once; manual LUT or equations, update when ADC sampling rate changes
Baseband DC offset Once
0x016[0], self clears when
done
RF DC offset Any time LO frequency changes more than 100 MHz
0x016[1], self clears when
done
Rx quadrature calibration Any time LO frequency changes more than 100 MHz Tracking runs continuously
Tx quadrature calibration Any time LO frequency changes more than 100 MHz
0x016[4], self clears when
done
Rev. A
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
