Datasheet 搜索 > 模拟开关芯片 > ADI（亚德诺） > ADG704BRMZ 数据手册 > ADG704BRMZ 产品设计参考手册 1/6 页
器件3D模型￥ 5.637
ADG704BRMZ 产品设计参考手册 - ADI（亚德诺）
制造商:
ADI（亚德诺）
分类:
模拟开关芯片
封装:
MSOP-10
描述:
ANALOG DEVICES ADG704BRMZ 芯片, 多路复用器 4路 SP
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
原理图在P4
型号编码规则在P6
导航目录
ADG704BRMZ数据手册
Page:
of 6 Go
若手册格式错乱，请下载阅览PDF原文件
EVAL-10MSOPEBZ User Guide
UG-1037
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Te l: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluation Board for 10-Lead MSOP Devices in the Switches and Multiplexers Portfolio
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 6
FEATURES
10-lead MSOP evaluation board
Clamp allows the main device to be easily changed
Gold pin connectors allow the addition of passive
components
SMB connectors for the input/output of signals
Additional space on-board to allow for prototyping
EVALUATION KIT CONTENTS
EVAL-10MSOPEBZ evaluation board
ONLINE RESOURCES
Documents Needed
Data sheet of the device being evaluated
EVAL-10MSOPEBZ user guide
EQUIPMENT NEEDED
Device being evaluated
DC voltage source
Analog signal source
Method to measure voltage, such as a digital multimeter (DMM)
GENERAL DESCRIPTION
The EVAL-10MSOPEBZ evaluation board evaluates 10-lead
MSOP devices in the Switches and Multiplexers Portfolio that
are purchased separately. A clamp is supplied with the EVAL-
10MSOPEBZ to secure a 10-lead MSOP device to the evaluation
board without the need for soldering, making the EVAL-
10MSOPEBZ evaluation board reusable for multiple devices.
Figure 1 shows the EVAL-10MSOPEBZ evaluation board. A
10-lead MSOP device can be clamped or soldered to the center
of the EVAL-10MSOPEBZ evaluation board. Each pin of the
device has a corresponding link from K1 to K10 that can be set
to either VDD or GND. A wire screw terminal supplies VDD
and GND. SMB connectors on the board allow additional external
signals to be supplied to the device. In addition, there is space
available at the top of the EVAL-10MSOPEBZ evaluation board
for prototyping.
Full specifications of the device under test (DUT) are available
in the corresponding product data sheet, which should be
consulted in conjunction with this user guide when using the
evaluation board.
EVAL-10MSOPEBZ EVALUATION BOARD PHOTOGRAPH
Figure 1.
14928-001
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
