Datasheet 搜索 > AD转换器 > TI（德州仪器） > ADS8327IBRSAR 数据手册 > ADS8327IBRSAR 开发手册 1/8 页
器件3D模型￥ 35.346
ADS8327IBRSAR 开发手册 - TI（德州仪器）
制造商:
TI（德州仪器）
分类:
AD转换器
封装:
VQFN-16
描述:
低功耗， 16位， 500千赫，单/双单极性输入，模拟 - 数字转换器，串行接口 LOW POWER, 16-BIT, 500-kHz, SINGLE/DUAL UNIPOLAR INPUT, ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL INTERFACE
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
应用领域在P8
导航目录
ADS8327IBRSAR数据手册
Page:
of 8 Go
若手册格式错乱，请下载阅览PDF原文件
1 Synchronizing Multiple ADS1271 Devices
Application Report
SBAS355 – October 2005
Synchronizing the ADS1271
Michael Ashton .............................................................................................. Data Acquisition Products
ABSTRACT
The ADS1271 is a delta-sigma converter, and these types of converters are reputedly
difficult to synchronize to external events. The ADS1271 has a synchronization input,
however, which indicates that not only is synchronization possible, but useful.
Synchronization on the ADS1271 serves two purposes. Most often, it is used to enable
simultaneous sampling by multiple ADS1271s, typically through a daisy-chain
configuration. Synchronization can also be used to match the conversion cycle of the
ADS1271 to external events. In the first section of this application note, we show how
to synchronize multiple ADS1271s to each other. In the second section, we show how
to make an ADS1271 perform conversions in response to an external event.
Contents
1 Synchronizing Multiple ADS1271 Devices ...................................................... 1
2 Synchronizing an ADS1271 to External Events ................................................ 5
List of Figures
1 Simultaneous Sampling in SPI Mode ............................................................ 2
2 Simultaneous Sampling in FSYNC Mode ....................................................... 3
3 Synchronization Timing ............................................................................ 4
4 Synchronizing the ADS1271 to a Pulse ......................................................... 5
5 PLL-Based Clocking ................................................................................ 6
6 Resynchronization Timing ......................................................................... 7
When multiple ADS1271s are synchronized, they sample simultaneously. Simultaneous sampling is often
needed in multi-channel systems, and the ADS1271 was specifically designed to make this configuration
as easy as possible. In fact, if you want to daisy-chain multiple ADS1271s, you have to synchronize them;
successful daisy-chaining depends on it.
In order to synchronize multiple ADS1271s, do the following:
• Connect the CLK and SYNC pins together. If you are using FSYNC mode, also connect the
DRDY/FSYNC pins together.
• After system power-up, wait long enough for the clock oscillator to start, and then apply a pulse to the
SYNC pin.
Figure 1 shows an example of this configuration for SPI™ format; Figure 2 shows this configuration for
FSYNC format.
SPI is a trademark of Motorola, Inc.
SBAS355 – October 2005 Synchronizing the ADS1271 1
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
