Web Analytics
Datasheet 搜索 > 微控制器 > Microchip(微芯) > DSPIC30F2010-20E/SOG 数据手册 > DSPIC30F2010-20E/SOG 数据手册 71/202 页
DSPIC30F2010-20E/SOG
器件3D模型
34.963
导航目录
DSPIC30F2010-20E/SOG数据手册
Page:
of 202 Go
若手册格式错乱,请下载阅览PDF原文件
© 2011 Microchip Technology Inc. DS70118J-page 71
dsPIC30F2010
12.0 OUTPUT COMPARE MODULE
This section describes the Output Compare module
and associated operational modes. The features pro-
vided by this module are useful in applications requiring
operational modes such as:
Generation of Variable Width Output Pulses
Power Factor Correction
Figure 12-1 depicts a block diagram of the Output
Compare module.
The key operational features of the Output Compare
module include:
Timer2 and Timer3 Selection mode
Simple Output Compare Match mode
Dual Output Compare Match mode
Simple PWM mode
Output Compare during Sleep and Idle modes
Interrupt on Output Compare/PWM Event
These operating modes are determined by setting
the appropriate bits in the 16-bit OCxCON SFR (where
x = 1 and 2).
OCxRS and OCxR in the figure represent the Dual
Compare registers. In the Dual Compare mode, the
OCxR register is used for the first compare and OCxRS
is used for the second compare.
FIGURE 12-1: OUTPUT COMPARE MODE BLOCK DIAGRAM
Note: This data sheet summarizes features of
this group of dsPIC30F devices and is not
intended to be a complete reference
source. For more information on the CPU,
peripherals, register descriptions and
general device functionality, refer to the
dsPIC30F Family Reference Manual
(DS70046).
OCxR
Comparator
Output
Logic
QS
R
OCM<2:0>
Output Enable
OCx
Set Flag bit
OCxIF
OCxRS
Mode Select
3
Note: Where ‘x’ is shown, reference is made to the registers associated with the respective Output Compare
channels 1and 2.
OCFA
OCTSEL
0
1
T2P2_MATCH
TMR2<15:0>
TMR3<15:0>
T3P3_MATCH
From General Purpose
(for x = 1 and 2)
0
1
Timer Module

DSPIC30F2010-20E/SOG 数据手册

Microchip(微芯)
202 页 / 2.75 MByte
Microchip(微芯)
772 页 / 8.47 MByte
Microchip(微芯)
66 页 / 1.52 MByte
Microchip(微芯)
18 页 / 0.3 MByte

DSPIC30F201020 数据手册

Microchip(微芯)
MICROCHIP  DSPIC30F2010-20E/SO  数字信号控制器, dsPIC30F系列, 80 MHz, 12 KB, 20 输入, I2C, SPI, UART
Microchip(微芯)
MICROCHIP  DSPIC30F2010-20I/SO  数字信号控制器, dsPIC30F系列, 80 MHz, 12 KB, 20 输入, I2C, SPI, UART, 5.5 V
Microchip(微芯)
MICROCHIP  DSPIC30F2010-20I/SP  芯片, 16位20MIPS DSPIC, SPDIP-28
Microchip(微芯)
dsPIC30F1010/202x 16 位数字信号控制器Microchip 的 dsPIC30F 系列数字信号控制器 (DSC) 为设计人员提供有着 MCU 的简便性的 DSP 类似性能。 dsPIC30F1010/202x 系列的设备具有外围设备,以支持数字开关模式电源 (SMPS) 和其他数字电源转换应用。### CPU 功能最大 30 MIPS CPU 速度 改良的哈佛体系结构 经 C 编译器优化的指令集体系结构 83 基座说明,带柔性寻址模式 24 位宽说明,16 位宽数据路径 12 K 字节片上闪存程序空间 512 字节片上数据 RAM 16 x 16 位工作寄存器阵列 32 个中断源 三个外部中断源 每个中断 8 个用户可选优先级级别 4 个处理器例外情况和软件陷阱 ### DSP 引擎功能模块和位倒序模式 两个 40 位宽蓄电池,带可选饱和逻辑 17 位 x 17 位单周期硬件部分/整数倍增器 单周期倍乘 (MAC) 操作 40 级柱式移位器 双数据获取 ### 外围功能高电流汇电流/源电流输入/输出引脚:25 mA/25 mA 三个 16 位计时器/计数器 - 将 16 位计时器配对到 32 位计时器模块的选项 一个 16 位捕获输入功能 两个 16 位比较/PWM 输出功能 四个带 8 个输出的 PWM 生成器 10 位 2000 Ksps 模拟到数字转换器 (ADC) - 6 到 12 通道,具体取决于型号 四个模拟比较器 3 线 SPI 模块 I2CTM 模块 UART 模块 ### dsPIC® 数字信号控制器
Microchip(微芯)
dsPIC30 系列 512 B RAM 12 kB 闪存 16位 数字信号控制器 - QFN-28
Microchip(微芯)
数字信号处理器和控制器 - DSP, DSC 16B MCU DSP 28LD 30MIPS 12KB FLASH
Microchip(微芯)
dsPIC30 系列 512 B RAM 12 kB 闪存 16位 数字信号控制器 - QFN-S28
Microchip(微芯)
Microchip(微芯)
Microchip(微芯)
器件 Datasheet 文档搜索
器件加载中...
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件