Datasheet 搜索 > 8位微控制器 > NXP（恩智浦） > MC9S08SH4CTG 数据手册 > MC9S08SH4CTG 数据手册 1/35 页
器件3D模型￥ 2.712
MC9S08SH4CTG 数据手册 - NXP（恩智浦）
制造商:
NXP（恩智浦）
分类:
8位微控制器
封装:
TSSOP-16
描述:
NXP MC9S08SH4CTG 微控制器, 8位, 通用 SH系列, S08SH, 40 MHz, 4 KB, 256 Byte, 16 引脚, TSSOP
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
引脚图在P4P5Hot
原理图在P3
封装尺寸在P28
型号编码规则在P27P28P29P30P31P32P33P34
技术参数、封装参数在P1P6P7P20P27
电气规格在P6P7P8P9P10P11P12P13P14P15P16P17
导航目录
MC9S08SH4CTG数据手册
Page:
of 35 Go
若手册格式错乱，请下载阅览PDF原文件
Freescale Semiconductor
Data Sheet: Technical Data
Document Number: MC9S08SE8
Rev. 4, 4/2015
© Freescale Semiconductor, Inc., 2008-2009, 2015. All rights reserved.
This document contains information on a product under development. Freescale reserves the
right to change or discontinue this product without notice.
MC9S08SE8
Features:
• 8-Bit HCS08 Central Processor Unit (CPU)
– 20 MHz HCS08 CPU (central processor unit)
– 10 MHz internal bus frequency
– HC08 instruction set with added BGND
– Support for up to 32 interrupt/reset sources
•On-Chip Memory
– Up to 8 KB of on-chip in-circuit programmable flash
memory with block protection and security options
– Up to 512 bytes of on-chip RAM
• Power-Saving Modes
– Wait plus two stops
• Clock Source Options
– Oscillator (XOSC) — Loop-control Pierce oscillator;
crystal or ceramic resonator range of 31.25 kHz to
38.4 kHz or 1 MHz to 16 MHz
– Internal Clock Source (ICS) — Internal clock source
module containing a frequency-locked-loop (FLL)
controlled by internal or external reference; precision
trimming of internal reference allows 0.2% resolution
and 2% deviation over temperature and voltage;
supports bus frequencies from 1 MHz to 10 MHz.
• System Protection
– Optional computer operating properly (COP) reset with
option to run from independent 1 kHz internal clock
source or the bus clock
– Low voltage detection
– Illegal opcode detection with reset
– Illegal address detection with reset
• Development Support
– Single-wire background debug interface
– Breakpoint capability to allow single breakpoint setting
during in-circuit debugging
• Peripherals
– SCI — Full duplex non-return to zero (NRZ); LIN
master extended break generation; LIN slave extended
break detection; wakeup on active edge
– ADC — 10-channel, 10-bit resolution; 2.5 μs
conversion time; automatic compare function;
1.7 mV/°C temperature sensor; internal bandgap
reference channel; runs in stop3
– TPMx — One 2-channel (TPM1) and one 1-channel
(TPM2) 16-bit timer/pulse-width modulator (TPM)
modules; selectable input capture, output compare, and
edge-aligned PWM capability on each channel; timer
module may be configured for buffered, centered PWM
(CPWM) on all channels
– KBI — 8-pin keyboard interrupt module
– RTC — Real-time counter with binary- or
decimal-based prescaler
• Input/Output
– Software selectable pullups on ports when used as inputs
– Software selectable slew rate control on ports when used
as outputs
– Software selectable drive strength on ports when used as
outputs
– Master reset pin and power-on reset (POR)
– Internal pullup on RESET
, IRQ, and BKGD/MS pins to
reduce customer system cost
• Package Options
– 28-pin PDIP
– 28-pin SOIC
– 16-pin TSSOP
MC9S08SE8 Series
Covers: MC9S08SE8
MC9S08SE4
28-Pin SOIC
Case 751F
16-Pin TSSOP
Case 948F-01
28-Pin PDIP
Case 710-02
TBD
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
