Datasheet 搜索 > DA转换器 > ADI（亚德诺） > AD5331BRUZ-REEL7 数据手册 > AD5331BRUZ-REEL7 产品封装文件 1/7 页
器件3D模型￥ 7.261
AD5331BRUZ-REEL7 产品封装文件 - ADI（亚德诺）
制造商:
ADI（亚德诺）
分类:
DA转换器
封装:
TSSOP-20
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
封装信息在P1P2P3P4P5P6P7
导航目录
AD5331BRUZ-REEL7数据手册
Page:
of 7 Go
若手册格式错乱，请下载阅览PDF原文件
TAPE AND REEL
PACKAGING
Introduction
The electronics industry is making a tremendous investment in surface-
mount technology. The reasons for this investment include cost savings
resulting from automated component placement and increased density
of PCB layout due to smaller package sizes.
Today’s placement machines can pick and place thousands of components
per hour with a very high degree of accuracy. To achieve this performance,
the component delivery system must be capable of feeding parts at high
speeds in a consistent orientation, positively indexed to the demands of the
machine. The leads of the components must be protected from damage
during shipment, handling, and placement.
The preferred packing material available today for these demands is
tape and reel. Analog Devices’ tape and reel system is fully compat-
ible with the detaping equipment that is standard in most automated
placement equipment.
In the tape and reel format, the components are placed in specifically
designed pockets embossed in a plastic carrier tape. The cover tape
is sealed to the carrier tape to keep the parts in place in these pockets. A
row of sprocket holes is provided along one edge of the embossed tape to
facilitate positive indexing. The tape is then wound onto a rigid plastic reel
that provides mechanical protection during handling and storage. These
reels are dust-free and compatible with a clean environment.
Specications
Analog Devices’ tape and reel specifications are in conformance with the
EIA Standard 481 “Taping of Surface-Mount Components for Automatic
Placement.”
ESD Protection
Analog Devices’ tape and reel delivery system is designed to offer a very
high degree of protection against electrostatic discharge
(
ESD
)
. All tape
and reel materials are static-dissipative. In addition, drypacked reels
are shipped in moisture barrier bags; nondrypacked reels are shipped in
a box with ESD conductive coating or in a conductive ESD bag. To retain
the benefits of this protection, the bags should be opened only at ESD
controlled workstations by trained personnel.
Peel Back Strength
The peel back force will be between 10 g and 100 g for 8 mm wide tape
and 10 g to 130 g for tapes 12 mm and wider when tested at room
temperature and pulled at a 175° to 180° angle with a peel-off speed
of 300 ± 10 mm/min.
Direction of Feed
Direction of feed is defined as the direction in which the end user unreels
the tape. The direction of feed for all products is counterclockwise when
the reel is held with the round sprocket holes facing the observer.
Figure 1. Direction of feed.
Visit analog.com
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
