Datasheet 搜索 > MOS管 > Infineon（英飞凌） > IPT007N06N 数据手册 > IPT007N06N 产品描述及参数 1/8 页
￥ 10.584
IPT007N06N 产品描述及参数 - Infineon（英飞凌）
制造商:
Infineon（英飞凌）
分类:
MOS管
封装:
PG-HSOF-8
描述:
INFINEON IPT007N06N 晶体管, MOSFET, N沟道, 300 A, 60 V, 0.00066 ohm, 10 V, 2.8 V
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
原理图在P2P3P4P5
导航目录
IPT007N06N数据手册
Page:
of 8 Go
若手册格式错乱，请下载阅览PDF原文件
For further information contact your local STMicroelectronics sales office.
September 2014 DocID025788 Rev 3 1/7
STEVAL-ILH007V1
150 W HID digital ballast based on the STLUX385A
Data brief
Features
• Input voltage: 185 - 265 Vac
• Rated lamp power: 150 W
• Efficiency: > 92.5%
• Power Factor: > 0.996
• Input current THD: < 10%
• Overtemperature protection for the electronics
• Open load detection
• Short-circuit protection
• Input overvoltage protection
• EMI: EN55015 pre-compliance
• PLM remote control ready
Description
The STEVAL-ILH007V1 evaluation board is a 150
W high intensity discharge (HID) digital ballast
platform based on the STLUX385A digital
controller.
This solution is designed to drive sodium and
metal halide HID lamps. The board is composed
of two stages, the power factor corrector (PFC)
and the inverter.
The PFC is based on a boost topology to correct
the AC input current in phase with the AC voltage
mains. The inverter is based on a full bridge
topology to drive the lamps. The STLUX385A
digital controller drives both stages.
The STLUX385A device is part of the STLUX™
family of STMicroelectronics digital devices
tailored for lighting and power conversion
applications.
The heart of the STLUX is the SMED (state
machine, event driven) technology which allows
the device to operate several independently-
configurable PWM clocks with up to 1.3 ns
resolution. A SMED is a powerful autonomous
state machine which is programmed to react to
both external and internal events and may evolve
without any software intervention. The SMED
even reaction time can be as low as 10 ns, giving
the STLUX the ability of operating in time critical
applications. The SMEDs are configured and
programmed via the STLUX internal low-power
microcontroller (STM8 for the STLUX385A).
The STEVAL-ILH007V1 is designed to receive
commands by the PLM remote control unit, to
create a network for street lighting based on
power line communication.
www.st.com
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
